Pixeye

High resolution IP camera. 2 Megapixel videosurveillance over the standard Ethernet network.

Technical specifications:

• Video Sensor: New generation 2 MPix CMOS ultra low noise sensor
• Optical format: 1/3”
• Progressive Scan
• Dynamic range: >71 dB
• Light sensitivity:
• 0,5 lx (with IR filter), 0,03 lx (without IR filter)
• Automatic exposure (AE/AES)
• Sensor Auto gain control (AGC)
• Auto white ballance (AWB)
• Backlight compensation (BLC)
• Flicker noise filter – 50/60Hz
• Pixel Binning Mode 2x2
• Digital Pan-Tilt-Zoom.

• Lenses: Standard C or CS mount, megapixel type

Settings and Configuration:

Device configuration via password protected intuitive web interface - remote via the network.

Some of the configuration options:

• Network settings - IP address, network mask, gateway, DHCP.
• Video stream configuration - resolution from 320x240 to 1600x1200, 4:3 and 16:9 modes, compression level, camera exposure (auto, manual, limited), image parameters.

• Flexible firmware upgrade via the network.

Interface:

100Base-T Ethernet - RJ-45+POE.

Videocodec:

High quality MJPEG compression.

Video Streaming Performance:

• 1600x1200 @ 15 frames/second MJPEG;
• HDTV 720p(1280x720) @ 25 frames/second MJPEG;

• PAL D1 (720x576) @ 30 frames/second MJPEG.

Power:

Power over ethernet - POE – IEEE 802.3af with POE switch or POE injector (36-60V DC).

Power consumption:

2W

Standards compliance:

• EN55022 class B - Emission
• EN55024 - Immunity

• EN60950-1 - Safety

Operating temperature range:

Industrial: -20°C to +50°C

Dimensions:

95 x 42 x 45mm (without lens and stand)

Weight:

300g (without lens and stand)

Datasheet (PDF): PIXEYE MEGA.

Manual (PDF): Instruction Manual PIXEYE MEGA.